|
|
| Tel: 01666 822 953 |
|
Printer Friendly Page |
|
Imprint Hoof Crack/Defect Repair Technique |
|
|
|
Hoof Crack Repairs
(This will form interdigitation for the thermoplastic with the horn and deflect any possible shear line.) (photo a.)
|
|
|
Photo a. |
|
|
|
|
|
Photo b. |
|
|
Ideally it is best to fill to the edge of the crack leaving it slightly proud but not overlapping the edge of the repair. Procedure complete. (Any excess can be rasped away when the thermoplastic Imprint Granules have cooled and the Imprint Structural Adhesive cured 5-10 minutes). Any voids at the top of the crack can be filled at a later date as it grows down to complete the repair. Running a film of Imprint Structural Adhesive over the finished repair ensures a good seal. |
|
|
To contact Imprint please call +44 (0)1666 822 953 IMPRINT® is a registered trademark of Poynton Ltd © 2002 - 2008 Poynton Ltd. All Rights Reserved |